|
|
Build Your Online Product Catalogs?
| Product Name: |
Platinum Cure Silicone Foams
|
| Supply Ability: |
|
| Related proudcts |
silicon oil, |
| Specifications |
is a soft, two-component platinum silicone flexible foam |
| Price Term: |
FOB/CIF/EXW/OTHERS |
| Port of loading: |
Shenzhen |
| Minimum Order |
200kg |
| Unit Price: |
18usd/kg |
|
Description of Platinum Cure Silicone Foams
Platinum Cure Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. HY-F663 Platinum Silicone Foams expands 3.5 times its original volume and develops a uniform 20 lb./cu. ft. cell structure (320 kg/m3). Vibrant colors can be achieved by adding Silc-Pig
Technical Parameters
Product HY-F663
Appearance white
Mix ratio(A:B) 1:1/10:1
Mixed Viscocity （mPa.s�15000±2000
Pot life/working time (mins) 5-8
Curing time/setting time (mins) 40
Shrinkage rate ï¼?ï¼?0.1
Approx. volumetric expansion 3.5 times
Lbs./Cu. Foot=Kgs./Cu.meter 20 lb/ft3 = 320 kg/m3
PROCESSING RECOMMENDATIONS of Platinum Cure Silicone Foams
Store and use at room temperature (73°F/23°C). These products have a limited shelf life and should be used as soon as possible. Good room size ventilation is essential. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Cure Inhibition - Addition cured silicones may be inhibited by certain contaminants such as sulfur, polyesters,certain wood surfaces, epoxies, urethane rubber and tin catalyzed silicones resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. If co***tibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of foam onto a non-critical area of the pattern.Inhibition has occurred if the matrerial is gummy or uncured after the recommended cure time has passed. This product will not cure against tin-based silicone rubbers.
Applying A Release Agent - Silicone Foams will stick to some surfaces and a release agent may be necessary to facilitate demolding. When casting Silicone Foams into or over other platinum silicones, apply Ease Release |
| Company: |
Shen zhen Hong Ye Jie Technology Co.LED.
|
| Contact: |
Ms. Linda Yang |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China |
| Postcode: |
|
| Tel: |
18938867614 |
| Fax: |
+86-0755-89948030 |
| E-mail: |
|
|
|
|
Home
